satbase
RIXSCam Mini image 1 1 / 4

Overview

Single-detector photon counting camera to improve the resolution of RIXS experiments

RIXSCam Mini is a high-precision x-ray detector designed for RIXS experiments, delivering single-photon detection with micron-level spatial resolution. Ideal for scientists and researchers in synchrotron and x-ray spectroscopy facilities, it combines ultra-low read noise (~1e⁻ rms) with advanced centroiding algorithms for “super-resolution” imaging. Fixed-angle Peltier cooling further reduces dark current and noise, making it a cutting-edge tool for both scientific and industrial applications.

Features & Benefits

  • Soft X-ray Detection (250 - 3000 eV): allows measurement of low-energy x-rays, covering important soft x-ray absorption and emission lines.
  • Exceptional <5 μm Spatial Resolution: enables extremely precise imaging of x-ray scattering patterns, allowing detailed analysis of fine spectral features and improving energy resolution in RIXS (i.e. spectroscopy) experiments.
  • Single Photon Detection: detects individual photons, improving signal sensitivity and enabling experiments with very low x-ray intensities or low count-rate samples.
  • Sub-Electron Read Noise: minimises detector noise, increasing the signal-to-noise ratio and allowing more accurate detection of weak signals.
  • Back-Illuminated EMCCD Detector: increases quantum efficiency by allowing more photons to reach the active area of the detector, improving sensitivity.
  • XHV-Compatible Manufacture: necessary for advanced x-ray experiments to avoid contamination and maintain beamline integrity.
  • Large Detector Area: captures more photons and wider scattering angles at once, reducing the need for multiple measurements and improving data collection efficiency (i.e. experimental run time and ultimately sample throughput).
  • Single Detector with Peltier Cooling: minimises thermal noise to improve image quality and support longer exposures without signal degradation. This compact, low-maintenance Peltier cooling offers a practical alternative to cryogenic systems, and when combined with a single detector, it provides a cost-effective solution.
  • Replaceable Detector: extends system lifetime and reduces long-term costs, allowing users to upgrade or replace the detector without buying a whole new system.

Applications

  • Resonant Inelastic X-ray Scattering (RIXS) Experiments: studying electronic excitations, magnetic properties, and charge dynamics in materials.
  • Synchrotron Beamline Experiments: supports soft x-ray beamlines (250–3000 eV range).
  • Condensed Matter Physics Research: investigating correlated electron systems, superconductors, and quantum materials.

EMCCD for Single Photon Detection

The RIXSCam system was originally designed in collaboration with scientists at the Paul Scherrer Institute (PSI) for the Swiss Light Source ADRESS beamline. Utilising EMCCDs it enables single photon detection, increasing the intensity of photons detected, and operates 3x faster than previous systems while maintaining <1 e- RMS noise.

Centroiding technology combined with a unique algorithm developed by Paul Scherrer Institute gives this system an unbeatable spatial resolution, allowing energy to be resolved to an unprecedented degree.

Key Specifications

  • Total Active Area: 26.11 x 25.73 mm
  • Active Pixels (H x V): 1632 x 1608
  • Pixel Size: 16 x 16 μm
  • Readout Rate: 3 MHz
  • System Noise HR Output: ≤15 e
  • System Noise (LS gain of 150): ≤ 1 e
  • System Noise (no LS gain): ≤ 100 e
  • Detector Incidence Angle: Fixed by customer’s mounting arrangement
  • Vacuum Compatibility: 1E-9 mbar
  • Temperature Control: -70°C to -40°C

Specifications

Parameter Value
Overview
Name RIXSCam Mini
Company XCAM Scientific
Category Other Spacecraft Product
Flight proven No
TRL —
Mechanical
Dry Mass 25kg
Mechanical Interface Standards 6” CF
Structural Materials

304L housing.

Stainless steel
Electrical
Data Interfaces

Cameralink interface via fibre optic cables.

Other
Performance
Image Sensor Technology

Back-illuminated EMCCD.

CCD
Pixel Pitch

16 x 16 µm pixels.

16µm
Ultimate Vacuum Pressure

Vacuum compatibility.

1e-9mbar
Pricing and procurement
Customization / NRE

Customer-selected detector angle and configuration options; final dimensions vary with selected options.

Yes

Files

Datasheet PDF · 525 KB · Nov 18, 2026
Need a document that is not listed here? Request it from the supplier

Request information

Sending to XCAM Scientific about RIXSCam Mini

Please be detailed in your message, including any specific requirements or questions you may have. (0/50 characters minimum)

Request options

By submitting, you agree to our terms. Your inquiry is shared only with XCAM Scientific.

More from XCAM Scientific

View all products
Other Spacecraft Product
RIXSCam
Optical Imaging Payload
C3D CubeSat Camera
Test & Measurement Equipment
CAVACam
Optical Imaging Payload
NuSCIS Space Camera