satbase
C3D CubeSat Camera image 1

Overview

A space-qualified TRL 9 CubeSat camera and imager board with 100% successful space-flight heritage

The C3D CubeSat Camera captures high-quality images from space for mission monitoring and analysis.

Designed for CubeSat applications, it features a modular architecture that supports up to three CMOS sensors for multiple fields of view or focal lengths.

With a proven space-flight heritage and a 100% success rate since 2014, it offers reliable, customisable imaging for cutting-edge space missions.

Features & Benefits

  • Modular Design: as a multi-head space camera payload.
  • Wide Field Imaging (WFI): offering rapid, broad area coverage.
  • Near-Field and Far-Field Imaging: delivers high quality images regardless of distance.
  • Both Monochrome and RGB Options Available: adaptable for individual customers application.
  • Lossless Image Compression: maintain perfect image quality with no data-loss enabling the storage and transmission of images with limited on-board resources.

Applications

  • Earth Observation: wide-field imaging of Earth’s surface for monitoring land, oceans, vegetation, and weather.
  • Spacecraft Deployment Monitoring: capturing images of solar panels, antennas, booms, or CubeSat deployable after launch to verify successful deployment.
  • Educational / Training Missions: low-cost imaging payload for student CubeSats, offering proven, flight-ready equipment.

C3D Optical Configuration and Customisation

The C3D CubeSat Camera’s imaging platform offers a versatile optical configuration, enabling mission designers to combine multiple camera heads on a single imager board to achieve specialised imaging geometries such as stereo views, multi-angle capture, or differentiated focal arrangements. Its flexible sensor-to-optics interface allows each camera head to be equipped with its own lens assembly, supporting customised fields of view and mission-specific optical requirements.

In addition to standard hardware, XCAM Scientific provides full custom-design and R&D support, integrating custom space technology equipment, alternative sensor choices, and bespoke mechanical structures for missions with unique orbital requirements.

Key Specifications

  • Spatial Resolution @ 650 km: 360 m GSD (with lens below). Other variants available
  • Image Sensor: 1.3 MP CMOS, 5/4 aspect ratio, RGB or B&W
  • Pixels: 5.3 µm (1280 x 1024)
  • Lens: Standard COTS lens 9.6 mm F/3.0
  • Wavelength Range: 400 – 650 nm (RGB, extended with B&W)
  • Exposure: Auto or fixed
  • Data Format: 8-bit raw and thumbnail (1:10)
  • On Board Memory: 16 MB SDRAM / 8 MB Flash
  • Image Compression: 50% JPEG-LS (Lossless)
  • Data Interfaces: I2C or SPI
  • Dimensions of Board: 9.5 x 9.1 x 2.7 cm
  • Mass (Board + 1 x WFI): 85 g
  • Peak Power Consumption: 845 mW
  • Operating Temperature: -25°C to +65°C
  • Survival Temperature: -35°C to +75°C (Tested)
  • Flight Heritage: Since 2014

Specifications

Parameter Value
Overview
Name C3D CubeSat Camera
Company XCAM Scientific
Category Optical Imaging Payload
CubeSat form factor Yes
Flight proven Yes
TRL

Flight proven in a successful mission

9
Heritage missions UKube-1, AlSat Nano
Mechanical
Dry Mass

Board + 1x WFI.

0.085kg
Envelope Shape

Board envelope.

Cuboid
Length

Board dimensions.

95mm
Width

Board dimensions.

91mm
Height

Board dimensions.

27mm
Electrical
Power Consumption (Peak) 0.845W
Data Interfaces

Alternative interfaces.

I2C, SPI
Performance
Detector Pixels
Horizontal 1280pixels
Vertical 1024pixels
RAM Capacity

SDRAM.

16MB
Focal Length

Standard COTS lens, F/3.0.

9.6mm
Ground Sample Distance

At 650 km, with standard lens; other variants available.

360m
Reference Altitude

Reference altitude for stated GSD.

650km
Wavelength Range

RGB; extended with B&W.

400–650nm
Image Sensor Technology

RGB or B&W options.

CMOS
Pixel Pitch 5.3µm
Environmental
Operating Temperature -25–65°C
Survival Temperature

Tested.

-35–75°C
Pricing and procurement
Customization / NRE

Custom camera configurations, optics, sensors and mechanical structures are available.

Yes

Files

Datasheet PDF · 795 KB · Nov 18, 2026
Need a document that is not listed here? Request it from the supplier

Request information

Sending to XCAM Scientific about C3D CubeSat Camera

Please be detailed in your message, including any specific requirements or questions you may have. (0/50 characters minimum)

Request options

By submitting, you agree to our terms. Your inquiry is shared only with XCAM Scientific.

More from XCAM Scientific

View all products
Optical Imaging Payload
NuSCIS Space Camera
Test & Measurement Equipment
CAVACam
Test & Measurement Equipment
PFO 1040
Other Spacecraft Product
RIXSCam