The Stormtrooper Magnetometer is a handheld 3-axis magnetometer with calibrated distance sensing, built to characterise magnetorquers and permanent magnets on the bench. It is the tool Minerva Dynamics uses to verify its own magnetorquers: map the field, fit the dipole moment, export the evidence.
Point it at a coil or magnet and press the button: the gun logs the 3-axis field together with the calibrated distance from the sensor to the target. The mobile and desktop app turns these captures into grid and 3D field maps, suggests where to measure next, and identifies a magnetorquer's magnetic dipole moment with a full uncertainty budget. Distance comes from an ultrasonic sonar at longer range and from the measured magnetic field itself when the target is too close for sonar.
3-axis field measurement: MLX90393 Hall sensor behind an acrylic window; X/Y/Z, |B| and ΔB from a zeroed baseline.
Calibrated distance: HC-SR04 sonar referenced to the magnetometer chip centre, with X/Y/Z components and a ruler-calibrated correction table.
Close range from the field: a calibrated dipole model of the magnet turns the field into distance and sideways offset where sonar cannot see.
Magnetorquer testing: off / +I / −I field maps with dipole-moment identification, c-optimal next-point suggestions and an uncertainty budget.
One-button capture and LED field ring: 16-sample averaged captures; 12 RGB LEDs show field strength at a glance.
Mobile and desktop app: Bluetooth LE or Wi-Fi, live readings, grid and 3D field maps, records with CSV / Excel export and optional Google Sheets and cloud sync.
ESP32-S3 inside: OTA firmware updates, 18650 Li-ion battery with USB-C charging, PETG enclosure with TPU gaskets.
Applications: magnetorquer acceptance testing, permanent magnet characterisation, residual field surveys of satellite parts and test setups, ADCS lab work and education. See the datasheet for full specifications.



